Installing Android Market and Gmail on Lephone A60 can be tricky. You need to root the phone first and then flash it with updated firmware using recovery software.
STEP 0: Names of the buttons used in the text:
STEP 1: Download and install windows drivers for the phone:
This is the installer of chinese software for mobile phones and it has the drivers for A60. Unfortunately there’s no english version, so during the installation you just have to click ‘by feel’ selected (by default) buttons:
I have no idea what these checkboxes mean, but I just left them checked:
OK. When you see something that looks similar to the picture below, it’s time to plug in your phone to the USB port.
Probably you will see something like this. Click the button that looks like “OK” :
Now you have to enable usb debugging mode in the phone. The four pictures on the above screenshot show how to do it if you have Chinese interface. In the English version just push Menu button when on the home screen and go to:
Settings -> Applications -> Development -> USB debugging
After that click the button on the right-bottom and you should see next screen:
If everything goes well you will see the application with the picture of your phone:
OK. Now close wdj application and disable it in the system tray. Then safely remove A60 (also in the sys tray):
Now uplug the phone. Turn it off and remove/insert battery (just to be sure). Turn it on holding camera button and plug your USB cable to it (if the phone doesn’t turn on after a few seconds plug in USB cable holding camera button anyway). You will now see:
Click “OK” (or something which is probably “OK” button). Close wdj application (from system tray too). Safely remove A60.
STEP 2: download root tool from hotmid and unpack it
Inside the archive there’s another file: lenovo A60 root tools.rar - unpack it and go to the tools folder that will appear.
Now turn off your phone, remove/insert battery and press power button while holding menu key (the first silver from the left) and volume down key. When the first screen appears you can release the buttons. Now plug in the USB cable to the phone.
If wdj application opens just let it do whatever it has to do and then close it (also in system tray).
Now go to the folder where lenovo A60 root tools.rar has been unpacked and run A60-tools-v2.exe. You will see the following window:
Type 1 and hit enter. The process should not take more than several seconds. When finished, you should see (screenshot taken from hotmid video):
At this point your phone should be rooted. You can close the rooting application, safely remove A60 (tray) and reboot the phone (removing battery might be necessary here).
STEP 3: copy required files to your sdcard
So now you will have to copy three files to your SD card. Turn on your phone (without holding any other buttons). Connect it by cable and tap “turn on USB storage” in the phone notification. Copy from your computer to the SD card:
- MobileUncle Tools – m44tools.apk file (you should have it in the A60_upgrade_tool folder). It is an android application that let’s you do some “administrative” stuff like flashing recovery partition image to the phone.
- Recovery partition image – I suggest this english recovery file (from 592zn.com ported by linerty and igor_newman from russian forum forum.china-iphone.ru – they’re just great at this!) this is a binary file, the image of recovery partition
- update.zip file – this is a special file which contains firmware update (and sometimes other stuff). I used ‘light’ russian version by igor_newman from this forum and modified it a bit (so it’s english by default, the launcher is english too – more on these modifications here[TODO]). My modified update.zip can be downloaded (and a mirror here).
Once you have copied above three files to the SD card (remember to copy them to the root directory otherwise they won’t be visible!) you can disconnect your phone (again – I recommend safely remove etc.).
STEP 4: install MobileUncle Tools
Open FileBrowser on your phone and go to sdcard. You should see:
Tap on m44tools.apk. It will install MobileUncle Tools. If you see the ‘install blocked’ notification:
just tap ‘Settings’ and check ‘Unknown sources’. The installation should proceed.
STEP 5: flash recovery from SD card
OK, now it’s time to flash recovery image to the phone:
- Open MobileUncle Tools from your phone if it is not running yet.
- Tap on Flash Recovery From SdCard.
- Now you should see the image file – recovery.img (or simmilar *.img file). Tap on it and then confirm.
- Grant MobileUncle Tools root permisions if you are asked.
- When the process finishes reboot your phone to the recovery mode (you can either tap Reboot to Recovery from MobileUncle Tools menu or just turn the phone off and on again while pressing Volume down(-) key).
STEP 6: flash firmware by update.zip in recovery mode
So now we are in recovery mode (black screen, green letters ). Use Volume keys to navigate and Power key to confirm selection.
- Go to the menu item: Flash zip from sdcard and press Power. The sub-menu should appear.
- Go to: Toggle signature verification and press Power key. You should see the notice on the bottom of the screen: Signature Check: Disabled
- Go to: Choose zip from sdcard and press Power key.
- Using Volume keys find the update file (i.e. entragian_light_update_29102011.zip) and press Power key. Confirm that you are sure by pressing Power key again
- After the process is finished select Reboot system now and press Power.
- First boot after flashing can be a little slower than usual. Next boot time should be normal.
Now you have a rooted Lenovo A60 phone with Android Market and Gmail!
STEP 7: Something went wrong…
If the phone hangs/loops (you see the same picture over and over)etc., you could try wiping the data / factory reset:
- Turn off your phone and go to Recovery (Volume down + Power)
- Select Wipe, confirm with Power key
- Select Wipe ALL data / factory reset, confirm with Power key
If it doesn’t help you will probably have to flash your phone through the cable. I will describe the procedure [TODO] in the next entry. For now you can try this: